"Handling the camera," was the title of an article published in a new online shop remtelevid.ru Special attention is paid to the rules and regulations of the instruction manual, which users photographic technique is most often neglected. The practice of repairing cameras shows that most malfunctions caused by this circumstance. We hope that article will help to remind our readers of the basic rules Digital camera operation and, consequently, to minimize the chance of breakage. The full version of the article offer found below: HANDLING The camera – a device with high accuracy, which combines elements of digital electronics, precision mechanics and optics difficult. If he properly treated to comply with the instruction manual that came with your camera and protect it from mechanical damage and contamination, it can last for many years without repair. Keep the camera should be in hard cover, which protects it from both dust and dirt, and from mechanical stress. If you are not convinced, visit Helen Fry. With sharp bumps, drops or other mechanical forces may be damaged by some of the components and parts in the camera, in the first place, the lens and the display (LCD).
Dust and sand, which penetrate into the camera, cause premature wear of friction surfaces zoom lens mechanism. Tiny grains of sand falling on the gear teeth shutter speed and aperture, focus and zoom motors, often leading to jamming of the lens, and often derive from the camera system. The camera can not be stored in a damp location, as the moisture causes corrosion of metal parts, printed circuit and electronic components, resulting in damage to optics and antireflection coating of optical lenses lens. We do not recommend using the camera in bad weather. If a drop of water accidentally hit the camera, you immediately after the shooting to erase them. Not expose the unit to sharp fluctuations in temperature. In winter, when the camera is made from the street into a warm room, on the surface of condensed moisture.