For example, they can withstand high temperatures. These enamels can be used for painting virtually any surface – they are well kept on concrete, plaster, metal, cardboard, wood, plastics, glass and paper. Alkali-resistant organosilicon enamel, they can be painted on fresh plaster, concrete. They can also be used for exterior and interior applications. Enamel can withstand temperature extremes well, protect metal surfaces from corrosion (which is recommended for painting radiators, pipes and fittings).
Silicon surface under the enamel is prepared in the same way as under the alkyd paint. In some cases, you can do without the primer and enamel applied immediately after cleaning the surface. Organosilicon enamel differ good shine and clean tone. Sales are domestic production marks the enamel KO-168 (white, yellow, red, brown, blue, green and black), KO-1112 (white, yellow, blue, brown, turquoise and green) and CR-835A (spray). In addition, commercially available grade enamel KO-84 and CA-814 – heat-resistant enamel silver, and CR-174 – especially for facades. Diluted enamel KO-168 and CR-1112 solvent 646 or turpentine, is applied in two coats by brush or spray.
Each layer is dried for 2 h. Most of these enamels are used to repair damaged areas on the surface of metal, enamel and the restoration of cleaved etc. Small paint defects, less than 5 mm long, invisible paint is quite simple. This is best done with a gun. Featuring fast-drying NITROEMALI under normal conditions (30-60 min.) Nitroemali give Solid solid film that can be polished to a mirror finish, rather resistant to moisture, mild acids and alkalis, petroleum products. Nitroemali widely used not only for domestic but also for outdoor painting, painting for appliances, furniture, various household items, as well as for many industrial purposes. The disadvantages are nitroenamels flammability of their films, low thermal stability (up to 80 C), as well as propensity to aging and cracking of sunlight.