Even the ancients recognized the importance of heat, because without it there would be no life, and every community member on duty at the fire, lest he went out. In modern life a warm house or apartment have the same great value, but by automated equipment, the need to control the process of heating a room by itself no longer, as there were heating systems, oil heaters, etc. The heating system – it's a lot of different structural elements and connections between them, which are intended for transmission and reception of heat in different rooms. The heating system starts with a heat source (boiler or CHP) or heat exchanger, which is associated with Local or district heating. The heating system can connect to a network of heat sensitive (CHP) and the independent scheme (individual boiler for one or more houses). From the heat source heat transferred to district heating (pipes). These pipes are copper (the life of more than 100 years, connect them by soldering, the cost is 2-3 times greater than the cost of other types of pipes), steel (used in large buildings, the life of 30 years, a very low price) and polypropylene, metal and other types of pipes made of polymeric materials (there are many ways of mounting the life of 50-70 years, but these pipes pass the air). Heat the tubes enters the heating devices (registers, radiators, etc.).
In order to choose the most suitable instrument take into account the architectural features of buildings, heat treatment facilities, sanitary, economic, technical performance instrument. In order to work properly heating and long, you need to carefully choose and design all of its elements. Therefore, installation of heating system is a long and complicated process. Before you start installation, you need to measure the area of heated space, to make all the necessary measurements. After that, experts will make a phased work plan (if heating the cottage or at home, it takes into account such nuances as the availability of pool, the number of living persons, etc. This is done in order to save money in the future the customer).
Naturally, the installation of heating the cottage is best done during the construction of town houses, ranging the stage of excavation, as some of the heating equipment have to be installed inside walls, in addition, it is necessary to determine the location of the boiler equipment, wiring heating pipes, sewers and electrical cables. Pre-designed circuit assembly significantly speed up the process. In order to installation of heating system a country house was made without any – any violations, it is best to contact the firm that will not only control the process from beginning to end, but the warranty service. In order to provide yourself and your family with hot water and uninterrupted heat, you need a serious approach to the problem of heating. After all, if you follow the requirements, the heating system at home will be a long time to operate and generate heat with minimal effort.