Design of engineering networks (in particular heating system) and their assembly are best left to qualified professional design firms as well as to consider a number of technical requirements of GOST and worry about the safety of residents and staff. One of the most important parts of the heating system is a boiler. Learn more on the subject from financial planner. When choosing a boiler is best to consult with a specialist in this area. Need to decide what fuel to use pot in the process: electricity, gas, liquid or solid fuel. If you are using the boiler to fossil fuels must be considered system chimney, placing it far away from the intake air for ventilation. Credit: Andi Potamkin-2011.

At the bottom of the chimney should install the trap, the condensate drain and caught in the chimney rain down the drain. Except Moreover, for a constant draft in the chimney damper to install. Then you pick up power boiler. The boiler output is determined by the rate of heat loss of the building, square feet of heated premises and the need to maintain a certain temperature. In the data sheet of the boiler is always indicated the estimated heated area, but with the additional facilities that require system heating, will require increased capacity of the boiler. In this case, accurate calculation best left to qualified professionals.

In private homes set a closed heating system with one or two contours. Accordingly, the need to select either single-loop heating boiler, boiler or turbofan, which will provide more and hot water. To ensure reliability and trouble-free operation boiler must be installed in the heating system pressure gauge, check valve, automatic air vent and membrane expansion tank. Additionally, you can set filters, deaerators, mixers, automation. Any engineering system, including heating system, requires a competent, skilled approach. Permanent control of good items, cleaning the boiler and piping will provide building heat for a long time.